unisonic technologies co., ltd 12N10 preliminary power mosfet www.unisonic.com.tw 1 of 5 copyright ? 2012 unisonic technologies co., ltd qw-r502-737.a 12a, 100v n-channel power mosfet ? description the utc ut12N10 is an n-channel mode power mosfet using utc?s advanced technology to provide customers with minimum on-state resistance for extremely high dense cell design, rugged avalanche characteristics and less critical alignment steps . ? features * r ds(on) < 0.10 ? @v gs = 10 v * r ds(on) < 0.12 ? @v gs = 5.0 v * high switching speed * low gate charge ? symbol 1.gate 3.source 2.drain 1 to-252 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 12N10l-tn3-r 12N10g-tn3-r to-252 g d s tape reel 12N10l-tn3-t 12N10g-tn3-t to-252 g d s tube
12N10 preliminary power mosfet unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-737.a ? absolute maximum ratings (t c = 25c, unless otherwise specified) parameter symbol ratings unit drain-source voltage (v gs =0) v dss 100 v gate-source voltage v gss 20 v drain current continuous t c = 25c i d 12 a t c = 100c 8.5 a pulsed (note 2) i dm 48 a power dissipation p d 30 w derating factor 0.2 w/c avalanche energy (note 3) e as 100 mj junction temperature t j +150 c storage temperature t stg -55 ~ +150 c note: 1 absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. pulse width limited by safe operating area 3. starting t j = 25c, i d = 12a, v dd = 50v ? thermal data parameter symbol ratings unit junction to ambient ja 100 c/w junction to case jc 5 c/w ? electrical characteristics (t c =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =250a, v gs =0v 100 v drain-source leakage current i dss v ds =max rating, v gs =0v 1 a gate- source leakage current forward i gss v gs =+20v, v ds =0v +100 na reverse v gs =-20v, v ds =0v -100 na on characteristics gate threshold voltage v gs ( th ) v ds =v gs , i d =250a 1 3 v static drain-source on-state resistance r ds ( on ) v gs =10v, i d =6a 0.15 0.18 ? dynamic parameters input capacitance c iss v gs =0v, v ds =25v, f=1.0mhz 430 pf output capacitance c oss 90 pf reverse transfer capacitance c rss 20 pf
12N10 preliminary power mosfet unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-737.a ? electrical characteristics(cont.) parameter symbol test conditions min typ max unit switching parameters (note 1,2) total gate charge q g v gs =10v, v dd =80v, i d =12a 7.5 10 nc gate to source charge q gs 2.5 nc gate to drain charge q gd 3.0 nc turn-on delay time t d ( on ) v dd =30v, i d =1a, r g =9.1 ? , v gs =10v (fig. 1) 12 24 ns rise time t r 7 14 ns turn-off delay time t d ( off ) 18 35 ns fall-time t f 3 6 ns source- drain diode ratings and characteristics maximum body-diode continuous current i s 12 a maximum body-diode pulsed current i sm 48 a drain-source diode forward voltage (note 1) v sd i s =12a, v gs =0v 1.2 v notes: 1. pulsed: pulse duration=300s, duty cycle 1.5% 2. essentially independent of operating temperature
12N10 preliminary power mosfet unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-737.a ? test circuits and waveforms d. u. t b s 25 g d a b a a b d l=100h d. u. t g s + - r g 3.3f 1000f v dd fast diode fig. 3 test circuit for inductive load switching and diode recovery times v i p w v d d. u. t l 2200f 3.3f v dd i d fig. 4 unclamped inductive load test circuit
12N10 preliminary power mosfet unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-737.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
